![]() In the FAF client, go to top left menu > Settings > General > Disable Starting with Steam > make sure it is checked.ģ. If you have not recently updated the kernel that also could be the issue because I am not sure that grub automatically updates the grub.cfg file with just the driver install. Installing all the nvidia packages should have done all the needed config but checking may reveal where it is failing. If yours is not similar with the nouveau drivers blacklisted and the nvidia driver activated then that also could cause the failure to load the proper driver. Mine is GRUB_CMDLINE_LINUX="rd.driver.blacklist=nouveau modprobe.blacklist=nouveau nvidia-drm.modeset=1 rd.lvm.lv=fedora/root rhgb quiet"Īnd can be found in /etc/default/grub and also seen by booting with the grub menu and pressing the “e” key while the grub menu is displayed during boot. If not properly formatted it can fail to install the nvidia module and instead fall back to the nouveau driver. The other thing to check is the kernel command line from grub during boot. The akmod-nvidia package should automatically build the needed nvidia modules for your kernel when it is installed. ![]() Try a reinstall of akmod-nvidia after verifying the above. While I realize there are some differences between F33 and F34 the basics are still the same in that all the tools are needed before you can get the system to auto-build the nvidia module for you. ![]() I would also suggest you install the other xorg packages in my list that you are missing. Those kmod-nvidia packages are compiled from the akmod-nvidia package so it is likely you need to install the kernel-devel & kernel-headers packages as well. Note that my list below has a kmod-nvidia package for each kernel installed. That list tells me you do not have all the required packages installed and that the akmod-nvidia package was not able to build the kernel modules. Most cards today are, but older ones need either the 340 or 390 drivers and are difficult to use with the current kernels. Note: You also need to verify that the card you are using is supported by the current nvidia driver. The end result of doing that is you will have the rpmfusion free and non-free repos enabled and routine updates will keep the drivers current as the drivers and kernels are updated. ![]() Potential interference is why I suggested you remove everything related then repeat the install with that procedure only. I have repeatedly used the procedure with the copr repo and can vouch that it works well 100% of the time as long as you do not have conflicting packages that interfere. The second (if not true then false) I have never used in the last 10 years so I cannot vouch for it’s accuracy. The correct procedure installs the akmod-nvidia package so your system can rebuild the driver with every kernel update. The first link you followed is wrong since it has you install the kmod-nvidia package, which is only needed on certain machines. Then repeat the install using only the procedure from t0xic0der’s copr repo.įollowing that you should reboot again and everything should just work. I suggest you remove all the installed nvidia drivers from all the different sources, as some of them don’t play well with others since they come from different sources.Ī simple "sudo dnf erase ‘*nvidia*’ " will handle that. It wasn’t possible to open the settings application and trying to execute nvidia-settings resulted in different errors:ĮRROR: Unable to load info from any available systemĮRROR: Unable to find display on any available system # dnf copr enable t0xic0der/nvidia-auto-installer-for-fedora -yĪfter each of these, I was able to reboot successfully. Simply execute the following commands in succession to install the tool. With this release, the executable binaries have been phased out in favor for a much convenient packaging on COPR. The v0.3.5 release of NVIDIA Auto Installer for Fedora has now been tested and confirmed to be working on Fedora 34. NVIDIA Auto Installer for Fedora now works with Fedora 34 Ask Fedora
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |